220L Household Domestic Hot Water Heat Pump Water Heater
Household All In One Air Source Hot Water Heat Pump Specification
Specification | ||||
Item | NERS- | FDV1.5/Y160 | FDV1.5/Y220 | |
Rated heating capicity | W | 5390 | 5390 | |
Input power | W | 1275 | 1275 | |
Voltage | V/Hz | 220V-50Hz | ||
Rated output water temperature | °C | 55°C | ||
Max output water temperature | °C | 70°C | ||
Water tank capacity | L | 160L | 220L | |
Refrigeration | R134A | |||
Control mode | Microcomputer central processor (touch control) | |||
Compressor | Form | Rotation type | ||
Quantity | 1 | 1 | ||
Brand | Mitsubishi | |||
UNIT | Net size | mm | 583*339*1782 | 741*444*1845 |
Weight | Kg | 91 | 115 | |
Nosie level | dB(A) | <50 | ||
Fan | Form | centrifugal | ||
Fan power | W | 50 | ||
Water tank built-in |
coil | aluminum | ||
Ambient temperature | (-10℃ – 46℃) | |||
Inlet pipe diameter | DN15 | |||
Outlet pipe diameter | DN15 | |||
Payment terms:T/T, 30% in advance, 70% balance before shipment. | ||||
Delivery time: 30 working days after deposit, right away after balance. | ||||
Other refrigerants,other prices | ||||
Package: carton plus woods | ||||
Parameter testing condition: | ||||
DB/WB:20℃/15℃, Water In/Out:15℃/55℃ |
All In One Heat Pump:
1.70°C output water temperature and super COP 4.23.
2.Using R134A green refrigeration.
3.Energy saving 75%, saving more running cost.
4.Square design and monoblock type,easy installation .
5.Strong insulation effect, 24 hours water temperature only drop<3 °C.
6.Dual tank technology, higher water output quantity.
Working Principle of Air Source Heat Pump
Heat pumps are machines that extract heat from one place, upgrade it to a higher temperature and move it to
another place. Air source heat pumps systems consist of four major elements that allow the refrigerant to pass
from the liquid state to the gas: a compressor, a condenser, an expansion valve and an evaporator.
Advantages of FDV1/Y160(A)
1.Luxury LED touch controller
Luxury LCD screen, touch control, flexible water temp. Adjustment, multiple running modes are available, enjoy
comfortable hot water.
2.Max water temperature reaches 70℃
Cold water continuously heat transfer with multiple heat exchangers,max Output water temp. can reach 70℃, hot
water output quantity is much higher than ordinary heat pump unit.
3.Dual water tank heat transfer technology
Hot and cold water storage separated, mixed water is small, heat more thoroughly, making the heat pump water output
quantity each 125%.
1.Dual inner-pot multi heat transfer
Little mixed water, rated water output increasing.
2.60mm Ultra-thick insulation layer
60mm high density polyurethane thermal insulation layer, 360 degrees of insulation, heat preservation effect is
30% increasing.
3.304 SUS inner water tank
Water tank with 304 stainless steel, compared with ordinary 304 stainless steel which is more resistant to corrosion,
anti-scaling, longer life.
4.Japan Mitsubishi Compressor
Adopted Mitsubishi compressor, high heating efficiency, stable running, 15-year lifespan.
Packaging and Shipping of Our Heat Pump
FAQ:
1.What is the working principle of your products?
A: Our products by absorbing heat from the air to heat water. We know that the air temperature is high and low,
that is,how much heat the air. This heat can be absorbed utilization. New energy refrigerant using a special kind of
air at room temperature can be automatically vaporized, the vaporized refrigerant to absorb heat from the air and
transfer the absorbed heat to the tank to heat the cold water tank.
2.The air heaters are generally mounted in there?
A: The air heater can be installed in the balcony or the bathroom, and now there are many new houses have been
able to consider the installation location of the air, villas, highrise housing can be installed, especially our square
water tank can be installed in the living room and kitchen. Because it is not installed in the attic, maintenance is
also more convenient.
3.Have to pay attention to what use it?
A: In general, when the compressor is subjected to high temperatures over many years will shorten its life,
therefore, set the water temperature of 50 degrees in summer; winter cold, user requirements for higher water temperature,
you can set the temperature 55 degrees. And we can peak electricity to avoid power peaks, saving electricity.
Usually after 22:00 during Valley Electric use air to ”time” heating water features, the price is cheaper.
4.What air-source heat pump water heater specifications? As consumers how to choose?
A: The air to water heater 100L, 160L, 200L, 260L, 320L, 500L and 3P engineering group, 5P, 10P, 24P different specifications
to meet the water needs of different families, hotels, hostels, etc. can also be heated by a large water project to meet the demand for water.
Hot water comfort requirements are relatively high, family members 7-12 or bathtub bathing, water points more villas,
can be equipped with the 500L; 4-6 family members
who are not a lot of demand for hot water household Select 150L-260L’s.